Our Products

Fiberglass Gratings & Pultruded Profiles

High-performance corrosion-resistant access solutions for industrial, marine, and infrastructure projects across Saudi Arabia and GCC

What Are Fiberglass Gratings & Pultruded Profiles

Busubait Fiberglass supplies high-performance fiberglass gratings and pultruded profiles for safe, durable access structures in corrosive and demanding environments. From platforms and walkways to ladders, handrails, trench covers, and GRP rebars, our FRP solutions provide a lightweight alternative to steel while maintaining excellent strength and long service life. As one of the experienced FRP grating suppliers in Saudi Arabia, we support industrial, marine, water treatment, and infrastructure projects across the region.

Fiberglass gratings are grid-like panels made from fiberglass reinforced plastic that are used as flooring, walkways, platforms, and covers. They are available as molded gratings or as pultruded panel assemblies.

Pultruded profiles are straight, continuous structural shapes such as I-beams, channels, angles, square tubes, and ladder rails. They are produced by pulling fiberglass rovings through a resin bath and heated die to create profiles with a constant cross-section and high strength-to-weight ratio.

Together, these products form a complete FRP structural system that is corrosion resistant, electrically non-conductive, and easy to install in new builds or retrofits.

Types of FRP Gratings

Molded Fiberglass Gratings

Manufactured in heated molds with continuous glass rovings laid in two directions.

Provide bi-directional strength, excellent impact resistance, and high corrosion resistance.

Ideal for walkways, trenches, chemical handling areas, and general industrial flooring.

Pultruded Fiberglass Gratings

Constructed from pultruded bearing bars mechanically locked with cross-rods.

Offer very high load capacity in the bar direction and are suitable for longer spans and heavier duty applications.

Commonly used for platforms, stair treads, mezzanines, and access ways carrying vehicular or high pedestrian loads.

Key Features & Advantages

Fiberglass gratings and pultruded profiles from Busubait are designed to perform reliably in harsh and corrosive conditions.

Corrosion and Chemical Resistance

FRP materials withstand exposure to saltwater, chemicals, moisture, and industrial atmospheres far better than many metals. This makes them suitable for chemical plants, marine environments, and wastewater facilities.

High Strength-to-Weight Ratio

Despite their low weight, FRP gratings and profiles offer high load-bearing capacity and stiffness, helping to reduce supporting steelwork and simplifying handling and installation.

Slip-Resistant Walking Surface

Gritted or patterned top surfaces provide secure footing in wet or oily areas, improving safety on walkways, stairs, and platforms.

Non-Conductive and Non-Magnetic

Electrical and thermal insulation properties improve safety around electrical equipment and in high-voltage or EMI-sensitive areas.

Low Maintenance and Long Service Life

FRP does not rust, flake, or require regular painting. Panels retain their appearance and performance with minimal upkeep, lowering lifecycle costs.

Design Flexibility

Panels and profiles can be supplied in different mesh sizes, thicknesses, depths, colors, and resin types. They can easily be cut, drilled, and assembled on site with standard tools.

Product Applications

Busubait fiberglass gratings and pultruded profiles are used across a wide range of industries:

Industrial Platforms and Walkways
Access platforms around tanks, process lines, and machinery where corrosion resistance and slip resistance are essential.
Trench Covers and Drainage Channels
Removable covers for cable trenches, drainage lines, and utility pits in plants and substations.
Stair Treads and Access Stairs
FRP stair treads, stringers, and landings that remain safe in wet, oily, or chemical areas.
Ladders, Handrails, and Guardrails
Complete FRP access systems around tanks, roofs, and sea-water ponds, combining gratings with pultruded posts, rails, and ladder rails.
Marine and Offshore Structures
Jetties, platforms, and walkways exposed to salt spray and humidity where steel would corrode quickly.
Water and Wastewater Treatment Plants
Walkways, covers, clarifier bridges, and operator platforms above basins, channels, and chemical dosing areas.
Electrical and Utility Facilities
Non-conductive flooring, stairs, and cable trench covers in substations, switch rooms, and power plants.

Pultruded Structural Profiles Range

Busubait offers a comprehensive range of FRP pultruded profiles that can be used alone or in combination with gratings:

I-beams, channels, and wide-flange beams for support frames and platforms.
Angles and flat bars for bracing, frames, and secondary supports.
Square and rectangular tubes for posts, guardrails, and equipment frames.
Ladder rails, handrail posts, and top rails for access systems.
Pultruded GRP rebars for concrete reinforcement in highly corrosive areas.

As an experienced FRP pultruded grating manufacturer, Busubait can design and supply complete FRP structures that integrate gratings, profiles, handrails, and ladders into one engineered solution.

Benefits Compared to Steel and Aluminum

Choosing fiberglass gratings and pultruded profiles instead of traditional metals brings several practical advantages:

FRP Advantages

Reduced corrosion and repainting costs in aggressive environments
Easier installation thanks to light weight and simpler handling
Safer, slip-resistant walking surfaces with non-sparking, non-conductive properties
ower total cost of ownership due to long service life and minimal maintenance

Traditional Metal Limitations

Customisation Options

Busubait can tailor FRP gratings and profiles to specific project needs:

Resin Systems

Different resin systems to match chemical and fire performance requirements

Panel Specifications

Panel thickness, bar depth, and mesh size selected to meet span and load criteria

Surface Finishes

Gritted or smooth surface finishes and optional nosings for stair treads

Color Options

Color options for safety zoning, visibility, or alignment with facility branding

Factory Fabrication

Factory-fabricated panels, stair treads, and platforms for faster site installation

Why Choose Busubait for Fiberglass Gratings & Pultruded Profiles

1000+

Projects Completed

25+

Years of Experience

50+

Countries Served

99%

Client Satisfaction

Proven FRP Solutions for Demanding Environments

Busubait’s Fiberglass Gratings and Pultruded Profiles provide a proven, corrosion-resistant alternative to traditional steel flooring and structural systems. Lightweight, strong, and low maintenance, they are well suited for platforms, walkways, stairs, and support structures in harsh industrial, marine, and water treatment environments. By partnering with an experienced FRP grating supplier in Saudi Arabia and FRP pultruded grating manufacturer like Busubait, you gain access to engineered FRP solutions that improve safety, reduce maintenance, and extend the life of your assets.

Get a Quote for Your FRP Access Solution

Planning a new platform, access way, or structural upgrade in a corrosive area. Our team can help you select the right FRP gratings and pultruded profiles for your project.

&nbspFree Consultation

&nbspTechnical Support

&nbspCustom Engineering